Taig CNC Ready Lathe (TAIGTurn 4029CR)

$2,000.00$2,125.00

This is the CR or CNC Ready version of the The TAIGTurn 2000 CNC Lathe with Ballscrews and 5C Spindle.

Clear
SKU: TAIGTurn 3019CR-1 Category:

Description

This is the CR or CNC Ready version of the The TAIGTurn 2000 CNC Lathe.  You supply your own stepper motors and controller. CNC Ready Lathe with Ball Screws is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an 5C spindle Headstock, 2 adjustable Tool Posts, and NEMA 23 motor mounts. (does not include ‘X’ or ‘Z’ Axis motors, Control Box or Software)

Specs:

  • Height 14″
  • Width 24″
  • Depth 31″
  • Weight 90 lbs (with 5C Headstock)
  • Maximum bearing runout 0.0002 in (5C)
  • X axis dovetails 45 deg
  • Z axis dovetails 90 deg
  • Ball Screws are 12mm x 2.5mm on X & Z
  • All lead screw drives have friction adjustable micrometer dials in .001 inch increments
  • Pulley type std. 1 5/8 in. bore multi-step belt (5C)
  • Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy

Capacity:

  • Travel in X axis 11.375 in (ballscrew)
  • Travel in Z axis 6 in
  • Max Rapid travel per axis 100 in/min (ballscrew)
  • Table dimensions 3 1/2 x 18.4 in
  • 4 spindle speeds 435-1800 RPM

Spindle (5C):

  • Runout less than .0002
  • Sealed precision ball bearing
  • Bearing OD 2.9528 in, ID 1.7717 in
  • Spindle hole 1 1/8 in
  • Spindle ID taper 10 deg (20 deg included)
  • Max collet diameter 1 1/16 in
  • Pulley size 1.625 in bore
  • Ball Bearings in all leadscrew bearing blocks

Additional information

Weight 90 lbs
Dimensions 18 × 18 × 12 in
Motor

Standard, No Spindle Motor (international)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.